To use the IVG Pro 12, remove the protective seals, connect the 2ml pod to the 10ml refill container, and slide the joined pack into the device. Check the battery level, then inhale through the mouthpiece. The device activates automatically, so there is no power button or menu to navigate.
This guide explains the first setup, charging, pod replacement and common fixes so you can use your kit correctly from the start.
What is the IVG Pro 12?
IVG Pro 12 is a rechargeable vape kit that uses replaceable, prefilled pod packs. Each pack combines a 2ml pod with a 10ml refill container, giving you 12ml of e-liquid in total.
The refill container feeds liquid into the pod automatically. You do not pour in bottled e-liquid or change a separate coil. Once the pack is empty, you replace it and continue using the same battery unit.
Its fixed mouth-to-lung, or MTL, airflow provides a tighter draw. You draw vapour into your mouth before inhaling, rather than taking a large, direct-to-lung inhale.
IVG Pro 12 specifications
| Specification | Detail |
|---|---|
| Advertised puff count | Up to 10,000 per pod pack |
| Battery | 1000mAh rechargeable battery |
| Charging connection | USB-C |
| charging time | Around 45 minutes |
| Total e-liquid capacity | 12ml |
| Pod and refill arrangement | 2ml pod plus 10ml refill container |
| Nicotine options | 20mg/ml, with 10mg/ml and 0mg |
| Coil | Integrated mesh coil |
| Activation | Inhale activated |
| Airflow | Fixed MTL |
| Battery information | Battery display |
| Manual refilling | Not designed for refilling |
The advertised puff count is an estimate. Draw length and frequency affect how quickly the liquid runs out.
What comes in the box?
IVG Pro 12 kit contains:
- One rechargeable IVG Pro 12 device.
- One 2ml prefilled pod.
- One 10ml prefilled refill container.
- One user manual.
A USB-C charging cable is not included, so you will need a suitable cable separately.
Keep the leaflet supplied with your kit. It contains the instructions for your particular device and should take priority if packaging or product details change.
How to set up the IVG Pro 12
Follow these 5 steps before your first use.
1. Unpack the device and refill parts
- Remove the battery unit, pod and refill container from their packaging.
- Check that the parts are intact and that no liquid has leaked into the device or charging port.
2. Remove the protective seals
- Take off the protective stickers and rubber stoppers shown in the supplied instructions.
- Check the mouthpiece and the connection points between the pod and refill container.
- A seal left in place can obstruct airflow or prevent the refill parts from connecting correctly.
3. Connect the pod and refill container
- Align and press the 2ml pod and 10ml refill container together until they click.
- Follow the leaflet's instructions and avoid forcing the connectors.
4. Insert the joined pack
- Slide the assembled pack firmly into the battery housing.
- Check the battery display and charge the device if needed.
5. Allow the liquid to settle, then inhale
- Keep the device upright for around 60 seconds before your first draw.
- Place your lips around the mouthpiece and take a gentle draw. The device should activate automatically.
How to vape with the IVG Pro 12
- Take a slow, steady draw through the mouthpiece. There is no button to hold, wattage to select or airflow setting to adjust.
- Drawing harder does not necessarily produce a better puff. If the draw feels unusually restricted, check for a remaining mouthpiece seal or an obstruction.
- Leave a pause between draws, particularly if the device becomes warm or the flavour starts to taste dry. Repeated puffs in quick succession can use liquid faster than it reaches the coil.
- When you put the device down, keep it upright and away from direct sunlight or other heat sources.
How to charge the IVG Pro 12
Connect a suitable USB-C cable to the device’s charging port, then connect it to a power supply that meets the requirements in the supplied manual.
The research gives an approximate charging time of 45 minutes. Treat this as a guide rather than a fixed duration, the remaining battery level, cable and power supply can affect charging time.
During charging:
- Place the device on a clean, dry, flat surface.
- Keep the charging port free from liquid.
- Check the battery display for charging progress.
- Disconnect the device when charging is complete.
- Avoid leaving it charging unattended or overnight.
Do not assume that a particular adapter is suitable simply because the cable fits. Check the charging specification in your leaflet.
How to replace the IVG Pro 12 pod
Replace the complete ivg pro 12 pod and refill container assembly when its liquid runs out or the coil develops a persistent burnt taste.
You keep the rechargeable battery unit.
- Pull the used pack straight out of the device.
- Remove the seals from a new pod and refill container.
- Align the new parts and press them together until they click.
- Slide the assembled pack into the device.
- Allow the liquid to settle before taking a gentle draw.
Do not transfer a used coil into a new pack or open the sealed components to add bottled liquid.
IVG states that its PRO refill system is compatible with PRO and PRO 2 devices. Check the replacement pack’s compatibility information before ordering, especially when choosing between different IVG ranges.
When should you change the pack?
Look for these signs:
- Empty liquid container: little or no liquid remains.
- Persistent burnt taste: the flavour stays burnt after a pause.
- Weak flavour and reduced vapour: these continue even after charging and checking the connection.
Weak vapour alone does not always mean the pack is empty. A low battery or poor connection can produce similar symptoms.
How long does the IVG Pro 12 last?
IVG Pro 12 is advertised to deliver up to 10,000 puffs from one complete pod pack. This describes the liquid supply across multiple battery charges, rather than the number of puffs from one charge.
There is no reliable fixed number of days for every user. Longer draws consume more liquid, and frequent use empties the pack sooner.
Use the remaining liquid and flavour as your guide. Avoid continuing to vape an empty pack simply because you have not reached the advertised puff count. Read our IVG Pro 12 review for more information about its specifications, features and value
IVG Pro 12 not working? Common problems and fixes
Start with the battery, protective seals and pod connection before assuming the device is faulty.
| Problem | Possible cause | What to check |
|---|---|---|
| No vapour when inhaling | Low battery, loose pack or protective seal left in place | Charge the device, check the seals and reseat the pack |
| Weak vapour | Low charge, low liquid or restricted mouthpiece | Check the battery level, liquid supply and mouthpiece |
| Burnt taste | Liquid not reaching the coil, empty pack or damaged coil | Pause, check the liquid and replace the pack if the burnt taste persists |
| Not charging | Cable, power supply or charging-port problem | Try another suitable cable and compatible power supply; inspect the port |
| Leaking | Poorly connected parts, damage or exposure to heat | Check the assembly, wipe away liquid and inspect for damage |
| Pack difficult to remove | Tight fit or sticky residue | Pull gently upwards without forcing or twisting the parts |
Why does the IVG Pro 12 taste burnt?
A burnt taste can occur when the coil heats without enough liquid around it. This may happen when a pack is empty or during repeated draws without a pause.
Stop using the pack if the burnt taste persists. Charging the battery will not repair a burnt coil, and adding liquid to a sealed pack is not an appropriate fix.
Why is the IVG Pro 12 flashing?
A flashing indicator can relate to battery status, a connection problem or a device protection function.
Check the battery level first, then remove and reseat the pack. Consult the leaflet for the exact meaning of the indicator pattern, different flashing sequences should not all be treated as the same fault.
What if it still does not work?
If charging, reseating the pack and checking the seals do not resolve the issue, contact Royal Vapery with your order details and a description of the fault.
Avoid opening the battery housing or attempting to repair the internal electronics.
IVG Pro 12 price at Royal Vapery
Royal Vapery lists the IVG Pro 12 at £8.99, with an advertised 3 for £22 offer. Check the product page for current availability and offer terms.
Using the prices in this research:
| Purchase option | Total price | Approximate price per kit |
|---|---|---|
| One kit | £8.99 | £8.99 |
| 3 kits | £22.00 | £7.33 |
Buying 3 kits separately would cost £26.97, saving £4.97 with the multi-buy offer. Once you already have a working device, check the price of compatible replacement packs before buying another complete kit.
Choosing your flavour and nicotine strength
The research includes fruit, ice, mint and tobacco options. Examples include Banana Ice, Blue Raspberry Ice, Kiwi Passionfruit Guava, Strawberry Watermelon and Tobacco.
Check the selected variant carefully before adding it to your basket. Flavour availability and nicotine strength can differ between packs, and a flavour listed in 20mg/ml may not also be available in 10mg/ml or nicotine-free form.
If you want to change flavour, replace the complete pack with another compatible flavour. Explore the IVG vape range to compare available devices, pods and flavours.
FAQs About IVG Pro 12
How do you turn on the IVG Pro 12?
Inhale through the mouthpiece. The device is draw-activated and has no power button.
Do you need to charge it before first use?
Check the battery display when you unpack it. Charge it if needed, following the supplied instructions.
How long does charging take?
The research gives around 45 minutes as an estimate. Actual charging time depends on the battery level and charging equipment.
Can you refill the IVG Pro 12 yourself?
No. Its sealed pod and refill container are designed to be replaced together. Do not open them to add bottled e-liquid.
Does 10,000 puffs mean one battery charge?
No. The advertised puff count refers to the complete liquid pack. You will need to recharge the battery while using it.
Can you change the coil?
The coil is built into the pod. Replace the complete pack when the coil is worn or burnt.
Does it come with a USB-C cable?
No. You need to provide a suitable charging cable.
Can you use any IVG pod?
No. Choose a replacement specifically labelled as compatible with your device. IVG has several pod systems, and the brand name alone does not establish compatibility.
What should you do when the pack is empty?
Remove the used assembly and fit a new compatible pack. Continue using the rechargeable device while it remains in good working condition.
